ALTA Land Survey Planning for Commercial Ground Leases

Land surveyor measuring a commercial property near a retail building and parking lot in North Carolina.

A ground lease can tie a landlord and tenant together for decades. The tenant builds on land it doesn’t own, and the landlord gives up control of that land for a long stretch. Both sides are betting on a clear understanding of exactly what’s being leased.

That understanding often starts out fuzzy. Leased areas get described as “Pad B” or “the northeast corner,” while shared drives and utility lines cross the site without a clear map. Those gaps can surface when a lender reviews the deal or when the tenant’s building plans hit a recorded easement.

An ALTA survey gives everyone the same set of facts before the lease is signed. It defines the leased premises, shows what crosses the land, and flags problems early. Start planning the survey alongside lease negotiations, not after them.

ALTA Survey Requirements for Commercial Ground Lease Properties

An ALTA survey follows national standards set by the American Land Title Association and the National Society of Professional Surveyors. Those standards spell out what the surveyor must research, measure, and show. The result is a detailed drawing that title companies and lenders recognize and rely on.

Ground leases add a few planning steps. The survey may need to show both the full parent parcel and the smaller leased area inside it. It should also include a clear legal description of the leased premises, since many pad sites have never been described on their own.

Table A Items Worth Discussing

Table A is a list of optional items that can be added to the survey’s scope. For ground leases, common picks include flood zone information, building locations, parking counts, and utility evidence. Zoning details may also come into play, depending on what the parties request.

The right mix depends on the lender, the title company, and the tenant’s plans. Ask each party for their survey requirements early. That avoids a second round of fieldwork when someone adds a request late in the deal.

How Ground Lease Boundaries Affect Tenant Development Plans

The leased area sets hard limits on what a tenant can build. Building size, parking, drive-thrus, and loading areas all have to fit inside those lines. If the boundary is off by even a few feet, a site plan can fall apart.

Setbacks make it tighter. A setback is the required distance between a building and a property line or street. Depending on local rules, setbacks may be measured from the parent parcel lines, the lease lines, or both, so confirm with the local planning office.

The ALTA survey gives the tenant’s engineer a reliable base map. It shows the leased area, nearby features, and recorded limits on one drawing. Tenants should share it with their design team before finalizing a site layout.

Mapping Easements, Utilities, and Shared Access Areas

Many ground lease sites sit inside larger shopping centers or mixed-use developments. That means shared drives, parking fields, and utility lines are common. Each one can affect what the tenant can build and how customers reach the site.

An easement is a recorded right that lets someone else use part of the land for a set purpose. Shopping centers often have a reciprocal easement agreement, which is a recorded document that sets shared rules for access, parking, and maintenance. The ALTA survey can plot those rights on the drawing when the title records are provided.

What the Survey Should Show

Make sure the survey captures these features near the leased area:

  • Recorded access, parking, and utility easements
  • Shared drives and curb cuts serving more than one parcel
  • Visible utility structures like manholes, transformers, and meters
  • Drainage features such as inlets, ponds, and swales

Underground utilities may need a separate location before the survey crew can map them. Ask whether that step makes sense for your site, especially if the tenant plans heavy construction.

Identifying Encroachments Before Ground Lease Negotiations

An encroachment is a structure that crosses onto land owned or controlled by someone else. On ground lease sites, they often come from older improvements. A neighbor’s sign, a shared dumpster pad, or a parking row may sit partly inside the proposed leased area.

The ALTA survey shows each encroachment with measurements. That information is far more useful before negotiations wrap up. Once the lease is signed, the parties have less room to adjust boundaries or assign responsibility.

Look closely at encroachments that could limit construction, access, or parking. Some can be solved with a small boundary adjustment in the lease. Others may need an agreement with a neighbor or a change to the site plan, so involve your attorney early.

Using ALTA Survey Findings to Support Lease Agreements

A good survey shapes the lease itself. The legal description of the leased premises often comes straight from the surveyor’s work. Exhibits attached to the lease may include the survey drawing or a simplified site plan based on it.

Survey findings also help the parties decide who handles what. Easements, shared areas, and encroachments can be assigned to the landlord or tenant in the lease terms. Clear exhibits reduce arguments years later, when the original negotiators may be long gone.

Lender and Title Company Needs

Tenants often finance their buildings with a leasehold loan, which is secured by the tenant’s interest in the lease. Lenders usually want an ALTA survey certified to them, along with leasehold title insurance. Certification is the surveyor’s signed statement naming the parties who may rely on the survey.

Requirements vary by lender and title company. Ask early who needs to be named in the certification and what Table A items they expect. Getting this right the first time keeps your closing date on track.

Frequently Asked Questions

Who usually orders the ALTA survey for a ground lease?

It varies by deal. Sometimes the landlord orders it to market the site, and sometimes the tenant orders it for its lender. The lease or letter of intent may say who pays. Settle this early so the survey can start without delay.

Can one ALTA survey cover both the landlord and the tenant?

Often it can, if the scope fits both parties’ needs. The surveyor can certify the drawing to the landlord, tenant, lender, and title company together. Each party should confirm its required Table A items first. That avoids extra fieldwork or a revised certification later.

Does a ground lease need a separate legal description?

In most cases, it helps to have one. Many pad sites are only shown on a site plan, not as a separate parcel. A surveyor can write a legal description for the leased premises based on measured lines. Your attorney can then decide how to use it in the lease and related documents.

author avatar
Surveyor

More Posts

UAV Survey Data for Large Fleet Parking Layouts

A fleet yard can look full long before it really is. Odd stall sizes, wasted corners, and drive aisles that trucks can’t turn through quietly eat up space. Then a new contract adds 40 vehicles, and the lot that seemed packed turns out to be poorly arranged. Fixing it starts

Read More »
Former industrial property with aging warehouse buildings and vacant paved areas, representing due diligence survey planning for brownfield redevelopment in North Carolina.
alta survey
Surveyor

Due Diligence Survey Planning for Brownfield Redevelopment

Old industrial land can be a great buy. It often sits near rail, roads, and utilities, and it may cost less than raw ground. But decades of use can leave behind buried tanks, old footings, and recorded limits on what you can build. A due diligence survey helps you see

Read More »

Property Survey Data for Cell Tower Lease Areas

A property survey at the start keeps everyone working from the same lines. A cell tower lease can run for decades, and the drawings attached to it often outlast the people who signed them. If the lease area, access route, or utility path is drawn loosely, the confusion shows up

Read More »
Aerial view of a rail-served industrial warehouse in North Carolina with freight railcars, railroad tracks, loading areas, and surrounding land.
drone surveying
Surveyor

Aerial Surveying for Rail-Served Industrial Site Planning

A rail spur can make an industrial site far more valuable. It also makes the site harder to plan. Tracks, embankments, loading docks, and ditches all have to work together, and small grade errors can keep a railcar from reaching the door. Aerial surveying gives planners a fast look at

Read More »